When we talk about air pollution and air quality testing, we often start picturing the winter smog. What about summer?

With its soaring temperatures and stagnant air, summer season brings its own unique air quality concerns. From increased ground-level ozone to wildfire smoke and industrial pollution, the warmer months can seriously affect both the indoor and outdoor the air. So, air quality test during summer is not just a precaution; it’s a necessity.

With our advanced air testing services, we help individuals and businesses detect, monitor, and resolve air quality concerns with accuracy and care. Keep reading to learn more about air testing services and its necessity during summer.

Understanding Air Quality Tests

An air quality test is a scientific evaluation of the air in a specific environment to check for pollutants like dust, VOCs (volatile organic compounds), allergens, and harmful chemicals. These tests are performed by professional air quality testing laboratories using advanced equipment and techniques. The goal is to make sure the air, whether indoor or outdoor, is safe for breathing and compliant with regulatory standards.

Here's a quick breakdown of AQI to give you a clearer picture on air pollution level.

• 0-50: Good – Air is clean and poses no risk.


• 51-100: Moderate – Generally acceptable but could affect sensitive individuals.


• 101-150: Unhealthy for sensitive groups – Caution advised for people with respiratory conditions.


• 151-200: Unhealthy – Everyone may begin to feel health effects.


• 201-300: Very Unhealthy – Health alerts issued.


• 301+: Hazardous – Serious health warnings; stay indoors.

Sadly enough, northern regions of India tend to have a higher AQI indicating increased air pollution.

Air Quality Test During Summer

The commonly discussed environmental concern during summer is the unavailability of quality drinking water. However, we believe that air quality should also be given equal vigilance during this season.

Air quality often worsens during the summer months due to a combination of environmental and atmospheric factors. High temperatures and intense sunlight accelerate the formation of ground-level ozone. In addition, wildfires become more frequent during dry summer conditions emitting fine particulate matter (PM2.5) and hazardous gases that significantly degrade air quality.

The season also sees a notable increase in pollen levels, which can exacerbate allergies and respiratory issues. Furthermore, stagnant air conditions during hot weather prevent pollutants from dispersing, allowing them to accumulate near the ground and contribute to smog formation.

When Is Air Quality At Its Worst?

During summer, air quality often declines during specific times of the day or following certain environmental events. The late morning to afternoon hours, typically between 10 AM and 4 PM, see a notable spike in ground-level ozone due to the combined effects of sunlight and heat reacting with pollutants.

During rush hours, vehicle emissions contribute heavily to air pollution, particularly in urban areas with dense traffic. Additionally, after wildfire events, smoke and fine particulate matter can linger in the atmosphere for extended periods, continuing to affect air quality long after the fires have been extinguished. Understanding these patterns can help you take timely precautions to minimise exposure.

How To Ensure Safer Air Quality During Summer?

Summer means more reliance on air conditioning, which can recirculate dust, mould spores, and chemical residues. A detailed assessment from air sample testing labs helps identify and eliminate these hidden pollutants.

For industries and commercial spaces, summer intensifies VOC emissions, especially in enclosed or poorly ventilated areas. Partnering with a professional air quality testing laboratory ensures your facility remains compliant and safe. If you're near industrial zones or wildfire-prone areas, air testing services can measure how much outdoor pollution is affecting your environment. Air quality tests can also detect allergens like pollen and pet dander, helping reduce triggers and improve overall well-being.

Reliable Air Testing Services

We offer industry-leading air testing services designed to meet a wide range of needs, from residential air sampling to complex industrial air quality audits. Our air quality testing laboratories are equipped with cutting-edge instruments and certified by NABL and other regulatory bodies, ensuring accuracy and reliability. Whether you're a business ensuring workplace safety or a homeowner concerned about summer allergies, we provide thorough air quality test solutions crafted for your requirements.

Partner With Us

While winter may dominate the conversation around air pollution, summer brings its own set of serious challenges. From ground-level ozone to wildfire smoke, the need for a professional air quality test is greater than ever. Whether you're a concerned homeowner or a safety-conscious business, taking advantage of expert air testing services can make all the difference.

Choose trusted names like ITC Labs and Qualitek Labs—two of the most reliable air sample testing labs in the country. Breathe easier this summer. Get your air tested today!

Packaging plays a crucial role in protecting products, ensuring their quality, and enhancing brand value. Whether it's food, pharmaceuticals, electronics, or consumer goods, packaging testing is essential to ensure durability, compliance with industry regulations, and overall product safety.  

At Qualitek Labs, we understand the importance of the quality of packaging material in preserving the internal content. In this comprehensive guide, we share our experience-based knowledge on packaging testing methods, packaging materials testing, and the importance of selecting the right packaging testing lab. 

What is Packaging Testing?

Packages are meant to protect the product inside from external stress; for that, the packaging material should be of appropriate quality. Packaging testing is the process of evaluating the strength, durability, and performance of packaging materials under different conditions. It helps manufacturers ensure their packaging meets the required packaging testing standards and protects the product throughout its lifecycle, from transportation to storage and end-use. 

Importance of Packaging Testing 

It is well established that packaging testing plays an integral part in preserving the quality of a product. Apart from that there are certain other factors that makes packaging testing pivotal in a product’s life cycle. 

Packaging testing is crucial for ensuring product safety and integrity while enhancing customer satisfaction. It helps reduce risks of contamination and damage, ensuring products reach consumers in optimal condition. Additionally, it aids in regulatory compliance by meeting industry-specific safety and quality standards. Testing also plays a key role in sustainability by optimising packaging materials, reducing waste, and improving overall efficiency in the supply chain. 

Key Packaging Testing Methods 

There are several types of packaging testing methods to assess different aspects of packaging.  

• Corrugated Board Testing 

Testing of corrugated boards is conducted by measuring edge crush, flat crush, and pin adhesion values. Higher edge crush value is correlated to stronger and more durable boxes. 

• Transit Testing 

Packaging should be compatible for transportation through various modes; so, a transit testing is used to understand the durability of packaging material. STM tests reveal the tensile strength, adhesive strength, and other transit properties of packaging material. These tests are conducted as per the guidelines of the ISTA and NABL. 

• Vibration Test 

Vibration test simulates transportation, storage, and operating environments to evaluate how well filled packages withstand shakes during transit. 

• Adhesion Strength Test 

Adhesion testing determines the bond strength of adhesives, tapes, and coatings, which is critical for packaging and quality control in various industries. 

• Thermal Shock Test 

Thermal shock testing assesses a pack's resistance to abrupt temperature changes, simulating real-world conditions such as transition between extreme environments. 

Packaging Testing Services 

Various packaging testing services are available, depending on the industry and product type. Some common services include: 

• Food Packaging Testing: Ensures compliance with food safety regulations. 

• Pharmaceutical Packaging Testing: Evaluates packaging for medicines to ensure sterility, barrier properties, and compliance with healthcare regulations. 

• E-commerce Packaging Testing: Tests packages for durability in shipping environments. 

• Sustainable Packaging Testing: Assesses eco-friendly packaging materials. 

Packaging Testing Standards 

Several regulatory bodies define packaging testing standards, including: 

• ISTA (International Safe Transit Association)

• ISO (International Organization for Standardization)

• NABL (National Accreditation Board for Testing and Calibration Laboratories)

 

Choosing the Right Packaging Testing Lab 

Selecting the right packaging testing lab is essential to ensure reliable and accurate results. A good lab should have accreditation and comply with international packaging testing standards to ensure credibility. Experience in industry-specific packaging tests is also crucial, as different sectors require specialised testing methodologies. Additionally, access to advanced testing equipment allows for comprehensive evaluations of packaging materials and performance under real-world conditions. Fast turnaround times and accurate reports are also important factors, enabling manufacturers to make timely decisions about their packaging solutions. 

Qualitek Labs is a leading packaging testing lab that offers comprehensive packaging testing services for various industries, including pharmaceuticals, food, and consumer goods. With ultra-modern equipment and a team of experienced professionals, we ensure that packaging materials meet global packaging testing standards such as ISTA and ISO. 

Whether it's ISTA packaging test for transit durability or pharmaceutical packaging testing for regulatory compliance, Qualitek Labs provides accurate and reliable testing solutions. By partnering withus, your business can enhance product safety, reduce risks, and optimise your packaging for better performance. 

Qualitek Labs for Reliable Packaging Testing Services 

Investing in product packaging testing is essential for businesses to ensure product safety, regulatory compliance, and enhanced customer experience. Whether you need ISTA packaging test, pharmaceutical packaging testing, or other specialised assessments, choosing a reliable packaging testing lab ensures your packaging performs optimally. 

Qualitek Labs stands as a trusted partner in packaging materials testing, providing industry-leading solutions for businesses seeking quality and compliance. Contact us today to make sure your packaging meets the highest standards for expert packaging testing services! 

In all its integrity and effectiveness, automotive component testing is an integral part of the rapid growth of the automotive industry in India. With innovations like electric vehicles (EVs), autonomous driving, and advanced safety systems, the need for automotive testing services is becoming more relevant. Manufacturers face increasing pressure to meet stricter global standards while delivering higher performance, safety, and sustainability, in addition to ongoing cost-cutting efforts.

Qualitek Labs as one of the leading automotive testing labs in India, is at the forefront of this transformation. We provide cutting-edge testing solutions to help manufacturers meet these challenges and ensure their products comply with the highest standards.

Revolutionising Automotive Components Testing

In an effort to be more reliable and customer-centric, we have developed an extensive set of automotive testing services in our lab. From batteries to the polymer used on your door handle, our testing facilities act as a one-stop solution for all your automotive compliance needs.

Safety of EV Batteries

As electric vehicles (EVs) gained popularity among Indians, the safety of EV batteries became a prime topic of discussion within the industry. Being a socially responsible and technically advanced automotive component testing lab in India, we made it our mission to tackle this problem way earlier. Today, our labs offer comprehensive battery testing services to guarantee the performance and safety of EVs. From vibration testing to thermal cycling to fire exposure tests, our test patterns are designed to assess battery reliability under extreme conditions.

We also conduct automotive environmental testing such as accelerated weathering and salt spray corrosion to evaluate the durability of automotive components. These tests also ensure the vehicles, and the components meet global standards for long-lasting performance.

 Electrical Systems Testing

Vehicles are heavily reliant on electrical systems. At Qualitek Labs, we specialise in on-board electrical (OBE) testing to assess the performance of electrical components.

Our tests focus on critical factors like dielectric strength, insulation resistance, and transient immunity to check and verify safe operation under all conditions. We also conduct rigorous IP testing for dust and water protection. Our labs also have the facility for fire safety assessments to guarantee that components are fire-resistant, ensuring vehicles meet the highest safety standards.

Driving Innovation in Automotive Component Testing

We live in a technologically progressive era where every day is about a new technology or an imperative upgrade. From being a mere mode of transport to autonomous-driven, energy-efficient, sustainable vehicles, the automotive industry has come a long way.

With new challenges and requirements continuously emerging in the automotive industry, Qualitek Labs remains dedicated to driving innovation in automotive testing services. Our full-fledged facilities and team of experts deliver comprehensive services to help manufacturers stay ahead of regulatory requirements.

The driving motive behind every automotive testing service we provide is to guarantee that our clients meet global compliance standards. While pushing the boundaries of performance, safety, and sustainability in vehicle designs, our services are crafted to make your compliance journey convenient.

Elevate your Business

Partner with Qualitek Labs today to navigate the complexities of automotive component testing and accelerate the development of safer, high-performance vehicles. Together, we can lead the way into the future of automotive innovation.

What is Fly ash?

It is a fine powdery substance which is a by-product of coal combustion in power plants. It is produced when coal is burned at high temperatures. Fly ash is basically generated from thermal power plants. It is a problematic hazardous solid waste all over the world. The inimical effects of fly ash on environment is unavoidable. Therefore, it should be disposed properly.  

Adding fly ash to soil for agricultural production can have both negative and positive impacts. It depends on various factors like the composition of the fly ash, soil properties, crop type and application rates. It contains variety of trace elements and minerals that may affect soil and plant health. 

Soil Ameliorates. 

Several studies proposed that it can be used as a soil ameliorate. Fly ash is a source of micro and macro nutrients .It has effectiveness in modification of soil health and crop performance. Although use of fly ash in agriculture is limited compared to other sections, its application in agriculture is one of the options available for disposal.  

Negative Impacts on Soil.                 

However, it also contains toxic heavy metals like copper, cadmium, nickel, chromium, zinc, lead etc. which can move to plants and accumulate resulting in toxicity to plants and animals. Application of Fly ash in agriculture has many benefits but there is a disadvantage for its heavy metals content. Enormous application of fly ash should not be recommended for growing crops.  

Agricultural lime application contributes to global warming as Intergovernmental Panel on climate change (IPCC)  assumed that all the carbon  in agricultural lime is ultimately releases as carbon dioxide to the atmosphere. So fly ash can be used in agriculture as an eco-friendly and economic fertilizer  instead of lime. Therefore, before addition to soil  it is desirable to ensure that heavy metals content in fly ash does not exceed the permissible limit of human consumption. 

Qualitek Labs

We at Qualitek Labs, Bhubaneswar is capable of offering mine and metal testing including fly ash in our state-of-the-art laboratory facility incorporative of technical expertise combined with the superior quality of our services. We provide innovative and best services to customers. We are specialized and trusted partner of choice for quality, health, safety, and sustainability solution.  

Please contact us for more information https://qualiteklab.com/contact-us/ 

In an ever-evolving world of commerce and industry, the need for trust and reliability is paramount. 

Whether you are developing products, projects, or processes, you need trusted independent inspection to ensure that both your legal obligations and the standards you expect are met, at every stage. This is where Qualitek inspection services comes into play. We are more than just an inspection service; we are your trusted partners in ensuring the integrity of your products and supply chain. 

Our comprehensive range of world-class inspection services helps you to reduce risk, control quality and quantity, and meet all relevant regulatory requirements across different regions and markets. 

We work where trade takes place. We immerse ourselves in local rules and regulations, so we can respond swiftly and expertly to a client’s request by verifying the quality and quantity, nature, and condition of goods. Typically, inspections occur when goods are loaded or discharged during transit, but we also perform bespoke inspection services, right along the supply chain, minimizing risk while maximizing value for our clients. 

These services occur at every step of the production, trade and transformation processes and include: 

      – Loading and discharge supervision 

•  Vessel hatch and hold inspection.  





•  Rake assessment 





•  Supervision of weighing / tally control 





•  Draft survey and tank gauging 





•  Sampling, samples preparation and sealing 





•  Traceability / identity preservation 

WHY QUALITEK INSPECTION SERVICES? 

With speed and accuracy, our inspection teams help customers verify of contractual conformity for a comprehensive range of commodities and goods, including minerals and metals, coal & coke, fertilizer, agricultural products, and consumer products. 

 

With Use of Qualitek lab services, our clients will get all information on real time basis. Right from starting of job to Sample preparation, arrival of sample in lab to result declaration. Our LIMS ensures minimum human intervention and accuracy of analysis and report delivery. 

Please contact us for more information https://qualiteklab.com/contact-us/ 

 

Introduction

Product safety testing is an important aspect of manufacturing and distribution process for electrical and electronics products. It includes evaluations and assessments of products to ensure the products must meet safety standards and regulations to safeguard users and environment. The very first step while product safety testing is the right classification of electronics products.  For the reason, different products have different safety standards and regulations. 

Qualitek Labs’ equipment capabilities:

Qualitek Lab is armed with various equipment capabilities to ensure quality and safety of your products. The list of various equipment is:  

• ED XRF (Energy Dispersive X-ray Fluorescence 





• ICP-MS (Inductively Coupled Plasma Mass Spectrometry) 





• GC-MS with Pyrolyzer (Gas Chromatography – Mass Spectrometry with Pyrolyzer) 





• Thermal Desorber 

• Head Space Analyzer 





• HPLC (High-Performance Liquid Chromatography) 

In analytical chemistry and materials science laboratories, these above instruments are essential tools. This enables to analyze, identify, and quantify compounds in various sample matrices for research, quality control and regulatory compliance purposes. However, the choice of equipment totally depends on the certain analytical need and type of samples to be examined. 

Some of the common Electrical safety tests and services provided by Qualitek Labs are:  

• Energy related hazards. 





• Electric Shock Hazard. 





• Fire & Heat (thermal) related hazards. 





• Mechanical hazards. 





• Material testing. 

• Radiation. 





• Chemical hazards. 





• EMF testing. 





• Vibration tests and measurements. 





• Acoustic tests and Endurance tests 

• Dust and water ingress (IP) tests. 





• Construction checks and expert opinion. 

Tests offer by Qualitek Labs but not limited to: 

• RoHS 2.0 (New EU Directive – 2019) 





• ELV (End of Life of Vehicle) 

• VOC Testing 





• Odour testing 





• Aldehyde Testing / Ketones Testing 

Qualitek Labs have more than a decade of experience in the industry! Our experts and resources are always ready to provide you best services in terms of helping with your testing, timelines, and making your products.                    

Our job is to help you bring your product to the market quickly, in the right way, and without spending too much money. This way, your business can keep moving forward. 

 Please contact us for more information https://qualiteklab.com/contact-us/